Hama EWS-870 Bedienungsanleitung Seite 8

6.2. Selecting the channel/other measuring stations
Note
• You can install two more measuring stations in addition to the included measuring station.
Ensure that the base and measuring stations are set to the same channel.
Visit www.hama.com for suitable measuring stations.
• Press the CH+ button (10) repeatedly to set the channel to that set on the respective measuring
station – see 4.1. Measuring station. Either 1, 2 or 3 (2) is displayed.
• The base station now shows the data measured (6) on the selected measuring station (2).
• Press and hold the CH+ button (10) to select the channel scan. The measurement values of the
individual measuring stations/channels (2) are displayed consecutively for 4 seconds each.
• Press the CH+ button (10) again to return to normal mode.
6.3. Basic and manual settings
Automatic setting using the DCF signal
After the first time the base station is switched on and successful transmission is established between
the base station and the measuring station, the clock will automatically search for a DCF signal.
During the search, the wireless symbol (7) will flash.
When the radio signal is received, the date and time are automatically set.
Radio icon Signal strength
No reception
Poor
Fair
Excellent
7