Cleaning And Maintenance - WAGNER W 180 P Originalbetriebsanleitung

W 180 P

Cleaning and Maintenance

The spray gun can only operate satisfactorily if it is cleaned and preserved after each
use.
Attention! Never immerse the spray gun in liquid when cleaning.
1) Empty out the remaining paint from the container.
2) Put proper thinner in the container and trigger the sprayer for approx. 2 seconds.
3) Pull the main plug out of the socket.
4) Disassemble the spray gun as shown in Illus. 9 (spare parts).
5) Thoroughly clean all soiled parts.
6) Reassemble the parts in reverse order.
7) Put a few drops of oil (e.g. sewing machine oil) in the intake and runback holes (Illus.
7, arrow). Briefly switch on the spray gun.
Accessories W 180 P (not included in scope of delivery)
Designation
Round spray nozzles for various spray materials:
Thick spray materials / nozzle size: 1.0
Very thin spray materials/nozzle size: 0.5
Paint container with cover
Needle-jet nozzle
Flexible nozzle extension with atomiser
Flexible Nozzle Extension (Illus. 4+8)
For spraying ceilings, resting objects or hard-to-reach areas e.g. radiators
Pos Name
1 Suction tube
2 Paint container with cover
3 Nozzle 0,8 mm
4 Locking nut
5 Valve
6 Pump housing
7 Piston spring
8 Piston
9 Nozzle spanner
10 Viscosity measuring cup
Spare Parts List (Illus. 9)
GB
Order No.
0046 906
0046 894
0413 909
0209 045
0046 675
Order No.
0413 305
0413 909
0046 903
0413 310
0209 042
0413 202
0033 028
0198 207
0199 327
0209 058
15