WAGNER W 180 P Originalbetriebsanleitung Seite 16

GB
the tool function is impaired. Have damaged parts repaired before using the tool.
Many accidents have their origin in power tools that have been maintained badly.
f) Use the power tool, accessories, insert tools, etc. in accordance with these
instructions and in a fashion specified for this special tool type. Take the
working conditions and the activity to be carried out into consideration. The
use of power tools for purposes other than the intended ones can lead to dangerous
situations.
5. Service
a) Have your tool repaired only by qualified specialist personnel and only with
original spare parts. This ensures that the tool safety is maintained.
b) If the supply cord is damaged, it must be replaced by the manufacturer or it's
service agent or a similarly qualified person in order to avoid a safety hazard.
Safety Instructions for Spray Guns
Attention! Danger of injection
Spray materials emerge from nozzle tips under high pressure.
Never point the spray stream towards human beings or animals.
•
The spray gun is to be used only for paints and solvents with a 21° C (32° in UK) flashpoint
or higher (See information on the material tin. Hazard class A II and A III permitted).
•
The spray gun is not to be used in work places covered by Ex-protection regulations.
•
To avoid the hazard of explosion when spraying, provide for effective natural or
artificial ventilation.
•
No sources of ignition are to be in the immediate area when spraying, e.g. open flame,
cigarettes, sparks, glowing wires and hot surfaces.
•
Before carrying out any work on the spray gun, unplug the lead from the power
socket.
•
Do not use spray guns to spray flammable liquids.
•
The spray guns are not to be cleaned with flammable solvents which have a flashpoint
under 21°C.
•
Take precautionary measures against potential hazards from the spray liquid and
follow any instructions given on containers or laid down by the manufacturer of the
liquid.
•
Do not spray any liquid of unknown hazard potential.
•
Wear a breathing mask and ear protection.
With original WAGNER accessories and spare parts, you have the guarantee that all
safety regulations are fulfilled.
Max. delivery rate:
Max. viscosity:
Max. pressure spikes: 150 bar
Power source:
Power consumption: 110 W
12
Technical Data
270 g/min
(runout time) 80 sec. Double insulation:
230 V, 50 hz
Container capacity:
Pump:
Pump cylinder:
Piston:
W 180 P
800 ml
Replaceable
Special steel
Hard-chrome-plated
special steel Ø 5 mm