Cleaning And Maintenance; Environmental Protection - WAGNER W 450 SE Handbuch

GB

Cleaning and Maintenance

Important!
Clean the spray gun thoroughly whenever it has been used.
Guns that have not been cleaned may malfunction!
The warranty does not apply for faults or malfunctions
due to impurities.
Therefore if malfunctions occur, check the cleaned unit
once more before sending it to your sales point.
The spray gun can only operate satisfactorily if it is cleaned and preserved after each
use.
Attention! Never immerse the spray gun in liquid when cleaning.
1 Empty out the remaining paint from the container.
2. Put proper thinner in the container and trigger the sprayer for approx. 2 seconds.
3. Pull the main plug out of the socket.
4. Disassemble the spray gun as shown in Illus.
5. Thoroughly clean all soiled parts Illus.
6. Reassemble the parts in reverse order.
7. Put a few drops of oil (e.g. sewing machine oil) in the intake and runback holes
(Illus. , arrow). Briefly switch on the spray gun.

Environmental protection

Protecting the environment: Paint or solvent remains must not be dumped in drains or
pipes. Where waste disposal is carried out by public authorities as a special service
free of charge, arrange for collection.
Designation
Round spray nozzles for various spray materials:
Very thin spray materials / nozzle size: 0,5
Thick spray materials / nozzle size: 1,0
Very thick spray materials / nozzle size: 1,2
Paint container with cover
Needle-jet nozzle
Flexible nozzle extension with atomiser
Suction extension for sucking from large containers
Flexible Nozzle Extension (Illus.
For spraying ceilings, resting objects or hard-to-reach areas e.g. radiators.
18
.
Accessories W 450 SE
)
(spare parts).
Order No.
0046 894
0046 906
0046 909
0413 909
0209 045
0046 675
0413 910
W 450 SE