Dometic BLUTEC 40d Betriebs-, Wartungs- Und Installationsanleitung Seite 34

CONNECTION TO THE EXTERNAL POWER SUPPLY
AG113 switching accessory (available on demand)
1) Use cables of suitable section (see table in paragraph "electrical connection")
2) Fix the AG113 switch in a position that facilitates connection.
GB
3) Break the cable connecting the mains input with the cut-out on the control
panel, so that it is possible to make the connections as shown in the wiring
diagram.
4) Connect the cables to the switch, it is necessary to insert a jumper between
terminal 1 and R1 and between terminal 3 and R3.
5) In positions R2 and R4, connect the cables from the generator 230 V terminal
board.
External
socket
Battery
User
Generator
- 34 -
AG113 switch
User manual