Herunterladen Inhalt Inhalt Diese Seite drucken

Care & Cleaning; Service & Customer Care - Kenwood FDP64 Bedienungsanleitungen

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 33
care & cleaning
Always switch off and unplug before cleaning.
l
Handle the blades and cutting discs with care -
l
they are extremely sharp.
Some foods may discolour the plastic. This is perfectly
l
normal and will not harm the plastic or affect the flavour
of your food. Rub with a cloth dipped in vegetable oil to
remove the discolouration.
power unit
Wipe with a damp cloth, then dry. Ensure that the interlock
l
area is clear of food debris.
Do not immerse the power unit in water.
l
Store excess cord in the storage area at the back of the
l
power unit
.
b
blender
1 Empty the goblet, unscrew the blade unit by turning to the
unlock position
to release. Then remove the blade unit
by pushing up from underneath.
Care should be taken when removing the blade unit from the
l
base.
2 Wash the goblet by hand.
3 Remove and wash the seal.
4 Do not touch the sharp blades – brush them clean using hot
soapy water, then rinse thoroughly under the tap. Do not
immerse the blade unit in water.
5 Leave to dry upside down.
dual whisk
Detach the beaters from the drive head by gently pulling
l
them free. Wash in warm soapy water.
Wipe the drive head with a damp cloth, then dry. Do not
l
immerse the drive head in water.
grinding mill
Remove the blade assembly from the jar by turning in an
l
anti-clockwise direction.
Wash the jar by hand.
l
Do not touch the sharp blades – brush them clean using hot
l
soapy water, then rinse thoroughly under the tap. Do not
immerse the blade unit in water.
Leave to dry upside down.
l
all other parts
Wash by hand, then dry.
l
Alternatively they can be washed in your dishwasher.
l
item
main bowl, mini bowl, lid, pusher
knife blades, dough tool
detachable drive shaft
discs
max capacity disc
whisk beaters
Do not immerse the drive head in water
blender goblet, lid, filler cap
blade unit and seal for blender
grinding mill blade assembly
grinding mill jar
spatula
service & customer care
If you experience any problems with the operation of
l
your appliance, before requesting assistance refer to the
"troubleshooting guide" section in the manual or visit
www.kenwoodworld.com.
Please note that your product is covered by a warranty,
l
which complies with all legal provisions concerning any
existing warranty and consumer rights in the country where
the product was purchased.
If your Kenwood product malfunctions or you find any
l
defects, please send it or bring it to an authorised
KENWOOD Service Centre. To find up to date details of
your nearest authorised KENWOOD Service centre visit
www.kenwoodworld.com or the website specific to your
Country.
Designed and engineered by Kenwood in the UK.
l
Made in China.
l
IMPORTANT INFORMATION FOR CORRECT
DISPOSAL OF THE PRODUCT IN ACCORDANCE
WITH THE EUROPEAN DIRECTIVE ON WASTE
ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)
At the end of its working life, the product must not be disposed
of as urban waste.
It must be taken to a special local authority differentiated waste
collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving
from inappropriate disposal and enables the constituent
materials to be recovered to obtain significant savings in
energy and resources. As a reminder of the need to dispose of
household appliances separately, the product is marked with a
crossed-out wheeled dustbin.
suitable for
dishwashing
4
4
4
4
4
4
4
8
8
4
4
9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis