The Operator; Work Area And Surroundings; Safe Condition - Stihl ADG 2 Gebrauchsanleitung

English
￭ Using the analyzer, AP adapter or AK adapter for
purposes for which they were not designed may result in
serious or fatal injuries, and damage to property may
occur.
► Use the analyzer, AP adapter or AK adapter as
described in this instruction manual.
► Do not use an AK adapter with a red cover to operate
STIHL or VIKING cordless products.
4.3

The Operator

WARNING
￭ Users who have had no instruction cannot recognize or
assess the risks involved in using the analyzer. The user
or other persons may sustain serious or fatal injuries.
► Read, understand and save the instruction
manual.
► If the analyzer is passed on to another person: Always
give them the instruction manual.
► Make sure the user meets the following requirements:
– The user must be rested.
– The user must be legally recognized as an adult.
– The user must not be under the influence of alcohol,
medication or drugs.
4.4

Work Area and Surroundings

WARNING
￭ Innocent bystanders, children and animals are not aware
of and cannot assess the dangers of the analyzer or
electric current. Innocent bystanders, children and
animals may be seriously or fatally injured.
► Keep bystanders, children and animals away from the
work area.
► Do not leave the analyzer unattended.
► Make sure that children cannot play with the analyzer.
14
￭ The analyzer is not waterproof. The analyzer may be
damaged if it is used in the rain or a damp location.
► Do not operate it in the rain or a damp
location.
￭ The analyzer is not protected against all ambient
conditions. If the analyzer is exposed to certain ambient
conditions, it may catch fire or explode. This can result in
serious injuries and damage to property.
► Operate the analyzer in an enclosed and dry location.
► Do not operate the analyzer in an easily combustible or
explosive environment.
► Do not operate the analyzer on an easily combustible
surface.
► Use and store the analyzer at a temperature
between +5°C and +40°C.
￭ Persons may trip over the connecting cable. This can
result in injuries and may damage the analyzer.
► Lay the connecting cable flat on the floor.
4.5

Safe Condition

The analyzer is in a safe condition if the following points are
observed:
– Analyzer is undamaged.
– Analyzer is clean and dry.
WARNING
￭ If components do not comply with safety requirements,
they will no longer function properly and safety devices
may be rendered inoperative. This can result in serious or
fatal injuries.
► Do not use a damaged analyzer.
► If the analyzer is dirty or wet: Clean the analyzer and
allow it to dry.
► Never attempt to modify the analyzer.
4 Safety Precautions
0458-757-9921-B