Storing The Analyzer; Cleaning The Analyzer; Maintaining And Repairing The Analyzer; Servicing And Repairing The Analyzer - Stihl ADG 2 Gebrauchsanleitung

8 Storing the Analyzer

1
► Insert diagnostic connector (2) in the power tool's socket
(1) so that the arrows on the connector and power tool line
up.
2
1
► If the AP adapter (2) or AK adapter (3) has to be used:
Insert the diagnostic connector (1) in the AP adapter (2) or
AK adapter (3).
The guide (arrow) on the diagnostic connector (1) must
engage the guide (arrow) in the AP adapter (2) or AK
adapter (3).
The test can be started.
WARNING
The cordless power tool's attachment may begin to move
during the test. This can result in serious injuries.
► Do not allow any other persons in the work area.
► Do not touch the attachment.
0458-757-9921-B
2
3
1
► Follow the instructions on the display or in the STIHL
diagnostic software.
8 Storing the Analyzer
8.1 Storing the Analyzer
► Disconnect the plug from the wall outlet.
► Remove the battery.
► Observe the following points when storing the analyzer:
– Analyzer is out of the reach of children.
– Analyzer is clean and dry.
– Analyzer is in an enclosed space.
– Analyzer is not hanging from the connecting cable.

9 Cleaning the Analyzer

9.1 Cleaning the Analyzer
► Disconnect the plug from the wall outlet.
► Remove the battery.
► Clean the analyzer, AP adapter and AK adapter with a
damp cloth.
► Clean the electrical contacts of the analyzer, AP adapter
and AK adapter with a soft brush.
10 Maintaining and Repairing the
Analyzer

10.1 Servicing and Repairing the Analyzer

► If the analyzer has a malfunction or is damaged: Repair
the analyzer with the aid of the service manual.
The AP and AK adapters require no servicing and cannot be
repaired.
► If the AP adapter or AK adapter is defective or damaged:
Replace the AP adapter or AK adapter.
English
17