Tunze 7097 Gebrauchsanleitung Seite 56

110
wavecontroller" – oscillating current with the Wavebox (1)
"
If enabled, the "night mode" function will interrupt the Wavecontroller when the aquarium lighting is switched off, the
Wavebox remains off. In the morning, after the light turns on again, the oscillating flow will also restart.
Further options:
The "wavecontroller" function can be combined with each "mode" setting. The calculated resonance frequency can be
entered in "pulse flow", the configured circulation pumps will then support the oscillating current flow in the aquarium.
wavecontroller" – oscillating current using only the Turbelle
"
The Wavecontroller function can also be used for Turbelle
recommend to always use at least two Turbelle
be clicked.
Settings: see "wavecontroller" - oscillating current with the Wavebox
pumps (2)
®
propeller pumps without the Wavebox. However, we
®
stream positioned adjacently. For this, the "inverse" function should
®
111