Tunze 7097 Gebrauchsanleitung Seite 41

Field "wavecontroller socket 3 & 4" (4)
The Wavecontroller function can be switched independently at the outputs 3 and 4 four each "mode". This function
was especially designed for the use of TUNZE Waveboxes, and is also interesting option for the electronically
®
controlled Turbelle propeller pumps.
®
This field is used to activate the function, but also the automatic search for the wave frequency, and direct or reciprocal
switching of the Waveboxes.
Field "data" (5)
This field is used activate the connections between the Multicontroller 7097 and computer:
4 5
"record to data file" = saves the settings of the Multicontroller into a file on the computer.
"restore from data file" = the data stored on the computer transferred back to the Multicontroller.
"send to unit" = computer settings are sent to the Multicontroller.
"receive from unit" = the Multicontroller settings are sent to the computer.
80 81