Intended Use; Features; Scope Of Delivery; Technical Data - Powerfix FAAS 10.8 A1 Bedienungsanleitung

Introduction
Cordless Pruning Saw FAAS 10.8 A1
Introduction
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as described
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.

Intended use

The tool - normative sabre saw - with fixed stop (shoe)
is intended for cutting wood, plastic and building
materials. The tool is suitable for rough saw cuts,
straight or curved cuts, and flush surface cuts. Used
with the holding bracket the tool is suitable for cut-
ting branches. Please note the information on saw
blades and instructions on sawing. Any other use
or modification of the tool is deemed improper use
with serious risks. The manufacturer is not liable for
damage caused by improper use. The tool is not in-
tended for commercial use.

Features

Switch lock
1
Handle
2
Battery pack
3
Release (battery pack)
4
ON- / OFF-switch
5
Saw blade
6
Shoe
7
Quick-action blade clamp
8
Hand guard
9
Release (holding bracket)
10
Holding bracket
11
Rapid charger
12
Status LED (green)
13
Status LED (red)
14
6 GB/IE/CY
Battery indicator
15
Test button
16

Scope of delivery

1 Cordless Pruning Saw FAAS 10.8 A1
1 Holding bracket
1 Battery pack
1 Rapid charger
1 Saw blade, wood 152 mm
1 Instructions for use
1 Carrying case

Technical Data

Rated voltage:
Rated idle stroke rate: n
Stroke length:
Max. cutting rate:
Battery pack FAAS 10.8 A1-1:
Type:
Rated voltage:
Capacity:
Rapid charger FAAS 10.8 A1-3:
Input:
Rated voltage:
Rated power:
Output:
Rated voltage:
Charging current:
Charging time:
Protection class:
Noise and vibration data:
Measured data for noise is determined in accord-
ance with EN 60745. The A-rated noise level of
the power tool is typically:
Sound pressure level: 79 dB(A)
Sound power level:
Uncertainty K:
Wear hearing protection!
10.8 V
0–2700 min
-1
0
20 mm
Wood 80 mm
LITHIUM-ION
10.8 V
1400 mAh
230–240 V∼ / 50 Hz
27 W
12.6 V
1500 mA
approx. 60 min
II /
90 dB(A)
3 dB
®