Measuring Volumes - Powerfix Z31174 Bedienungsanleitung

89108_pow_Multifunktionsdetektor_content_LB3.indd 20
3. Press the MODE button
now ready for the second measurement.
4. Measure the next surface area.
5. Press the + / = button
appears in the display.
6. Press the RM button
measurement is shown in the lower row of the
display.
7. Press the + / = button again. Both measure-
ments are added and the result is shown in
the lower row of the display.
8. Repeat steps 2 to 7 to add further measure-
ments.
9. Press the MODE button
addition mode. All the measurements will be
deleted.

Measuring volumes

1. Slide the function switch
„DISTANCE". The display
2. Press the MODE button
„L" (length) appears in the display.
3. Press the READ button
length. The measured length appears in the
upper row of the display and the message
„W" (width) starts to blink.
4. Press the READ button to measure the width.
The measured width appears in the upper
row of the display and the message „H"
(height) begins to blink.
20 GB/IE
. The appliance is
4
. The message „+"
12
. The result of the first
10
to leave the
4
to the position
9
is turned on.
2
twice. The message
4
to measure the
6
31.01.13 15:49