Select Attenuation (Fil); Restore Factory Settings; (Reset) - Seca 376 Bedienungsanleitung Und Garantieerklärung

Select attenuation (Fil)

Restore factory settings

3. Select a menu item:
4. Confirm your selection.
The current selection is displayed.
5. Select the setting you require:
6. Confirm your selection.
You will leave the menu automatically.
7. If you also wish to activate the acoustic signal for
the second function, repeat this procedure.
You can use attenuation (Fil = filter) to reduce any inter-
ference during weighing (e.g. caused by patient moving).
1. Select the item "Fil" in the menu.
2. Confirm the selection.
The current selection is displayed.
3. Select an attenuation level.
4. Confirm the selection.
You will leave the menu automatically.
You can restore the factory settings for the following
functions:

(RESET)

Autohold (Ahold)
Acoustic signal (Press)
Acoustic signal (Hold)
Attenuation (Fil)
Stored value Breast Milk Intake
Function (BMIF)
Wireless module (SYS)
Autosend (Asend)
Autoprint (APrt)
– Press: Acoustic signal whenever a key is
pressed
– Hold: Acoustic signal with a stable weighing
value.
– On
– Off
– 0: low attenuation
– 1: moderate attenuation
– 2: high attenuation
Function
English
Factory setting
depending on
model
off
on
0
0 kg
off
off
off
Operation • 49