Activating Acoustic Signals (Beep); Select Attenuation (Fil) - Seca 727 Bedienungsanleitung Und Garantieerklärung

Activating acoustic

Select attenuation (FiL)

64 •
Downloaded from www.Manualslib.com
You can set whether an acoustic signal is to be emitted
whenever a key is pressed or a stable weight value has
signals (BEEP)
been attained. The latter is relevant for the Hold/Auto-
hold function.
1. Select the "bEEP" item from the menu.
2. Confirm the selection.
3. Select a menu item
4. Confirm your selection.
5. Select the setting you require:
6. Confirm your selection.
7. If you also wish to activate the acoustic signals for
You can use attenuation (Fil = filter) to reduce any inter-
ference during weighing (e.g. caused by patient move-
ments).
1. Select the "Fil" item from the menu.
2. Confirm the selection.
3. Select an attenuation level.
4. Confirm the selection.
manuals search engine
NOTE
The function "Acoustic signal when weighing
value is stable" is activated at the factory. If
required, you can disable this function.
– PrESS: acoustic signal whenever a key is
pressed
– HOLd: acoustic signal when weighing value is
stable
The current setting is displayed.
– On
– Off
You exit the menu automatically.
the second function, repeat this process.
The current setting is displayed.
– 0: low attenuation
– 1: moderate attenuation
– 2: high attenuation
You exit the menu automatically.