Charging The Batteries; Setting The Time And Date On The Handset; Setting The Display Language; Auto Answer - AUDIOLINE SURF Bedienungsanleitung

Preparing the Telephone

Charging the batteries

☞
Before the handset is used for the first time, place it on the
base station for at least 14 hours.
The handset warms up during the charging process. This is
normal and does not represent a risk. Use only the adapter
plug unit provided for the charging station. The battery status
is shown on the display. When the battery capacity is nearly
exhausted, the battery symbol ( ) will flash in the display
and you will hear the battery warning sound (if the option is
switched on) / menu item "HS SETTINGS/TONE SETUP/BAT-
TERY LOW"). You still have up to ten minutes of talk time.

Setting the time and date on the handset

At initial operation the handset does not have the correct time
(e.g. for entries in the call list). Date and time are set through
the menu item "HS SETTINGS/ DATE & TIME".

Setting the display language

The display language is available different languages. The
default setting is "German (Deutsch)". Set the language using
the menu item "MT-EINSTELL./ SPRACHE".

Auto Answer

If this function is activated, an incoming call is taken when the
handset is removed from the base station. The automatic ans-
wering function is activated and deactivated using the menu
item "HS SETTINGS/ AUTO ANSWER".
8