Selecting The Base; Setting The Dial Mode; Setting The Flash Time - AUDIOLINE SURF Bedienungsanleitung

Setting the telephone

Selecting the base

/
/
/
☞
If your handset is registered to more than one base station
(up to 4 base stations), you can select the active base. The
current base station is marked with a "+".
When "AUTO" is set, the handset will always connect to the
base station, which first will be detected.

Setting the dial mode

/
/
/
☞
In most situations the TONE option should be selected.

Setting the Flash Time

/
/
/
26
Press the Menu key.
Select HS SETTINGS and press the Menu
key.
Select SELECT BASE and press the Menu
key.
Select a base and and confirm with the Menu
key.
Press the Menu key.
Select BS SETTINGS and press the Menu
key.
Select DIAL MODE and press the Menu key.
Select TONE or PULSE and press the Menu
key.
Press the Menu key.
Select BS SETTINGS and press the Menu
key.
Select FLASH TIME and press the Menu
key.
Select 100 ms, 300 ms, 600 ms or 1000 ms
and confirm with the Menu key.