Specifications - Sony SVT-L230P Bedienungsanleitung

Specifications
General
Recording method Dual-head rotating helical scanning
system
Tape speed 11.70 mm/sec (6 or 8-hour mode)
Specified video cassette tape
VHS 1/2 inch video cassette tape
Recording/playback time
6, 18, 30, 48 and 72 hours (when
using E-180 tape)
8, 24, 40, 64 and 96 hours (when
using E-240 tape)
Fast-forward/rewind time
Approx. 2.5 minutes (when using
E-180 tape)
Colour system PAL colour
Video
Recording method Luminance signal: FM method
Colour signal: Subcarrier low
frequency conversion methed
Input BNC: 1 Vp-p, 75 ohms unbalanced
Output BNC: 1 Vp-p, 75 ohms unbalanced
Horizontal resolution
Black & white mode: 320 lines
Colour mode: 240 lines
S/N 42 dB
Audio
Input 315 mV (–7.8 dBs), phono jack
47 kilohms unbalanced
Output 315 mV (–7.8 dBs), phono jack
600 ohms unbalanced
Microphone input –60 dBs,
ø3.5 mm minijack,
600 ohms
S/N 40 dB
42
Connector
Alarm input Low level
Alarm output +5 V, 5.7 kilohms (Low active)
Switch output +5 V, 5.7 kilohms
Tape end output +5 V, 5.7 kilohms (Low active)
Warning output +5 V, 5.7 kilohms (Low active)
Timer output +12 V, 5.7 kilohms (High active)
External timer input
Low level
Clock set output +5 V, 5.7 kilohms (Low active)
Clock set input Low level
Series output +5 V, 5.7 kilohms (Low active)
Series input Low level
Remote control input
ø3.5 mm minijack
Other specifications
Operating temperature range
5°C to 40°C
Operating humidity range
80% or less
Power supply 220 - 240 V, 50 Hz
Power consumption
17 W
External dimensions
Approx. 420 × 100 × 340 mm
(w/h/d)
× 4 × 13
5
(16 /
8
Mass Approx. 5.8 kg (12 lb 9 oz)
Supplied accessory
AC power cord (1)
Optional accessories
SVT-RS1A Computer Interface Board
SVT-RM10 Remote Control Unit
Design and specifications are subject to change
without notice.
1
/ in.)
2