Restoring The Printed Orders To Unprinted Status; Restoring All The Printed Orders To Unprinted Status - Sony MPS-V500P Bedienungsanleitung

Restoring the printed orders to
unprinted status
To avoid repeated printing, an "*" mark is added to the order that has been recorded. If you wat to
print the orders with "*" again, you must delete the "*" marks to restore the orders to unprinted
status.

Restoring all the printed orders to unprinted status

Before operating, delete the orders that you do not need to print again.
1
Display the ORDER screen, and select "EDIT" to
display the EDIT screen.
2
/
Press the keys to move the cursor (z) to "P
RESTOR," and press the EXEC/ROTATE key.
"P RESTOR?" appears.
3
Press the EXEC/ROTATE key again.
The unit records the changed settings on the MD and
returns the display to the EDIT screen. Make sure that
all the "*" marks in the P column have disappeared.
To cancel restoring
In step 3, press the CANCEL/MIRROR key instead of the
EXEC/ROTATE key. The display returns to the ORDER screen
and the "*" marks remain.
To cancel the EDIT screen
During the operation above, press the CANCEL/MIRROR key
once to return to the ORDER screen, or twice to return to the
picture display.
"*" in this column will disappear.
MPS-V500/V500P (U/C/CED/GA).3-856-662-11 (1).EN
Note
Do not disconnect the battery or
DC cord during recording. Doing
so may damage the data on the
MD.
Error message
If the battery is too weak to record,
"LOW BATT" appears. Replace it
with another battery or recharge it.
23
(EN)