Audio Setup - Clarion CZ702E Benutzerhandbuch & Installationshandbuch

System Setup
• ON:
You can listen to your telephone calls from
the speakers connected to this unit.
*When listening to your calls on your car
speakers, you can adjust the volume by
turning the [VOLUME] knob.
A-CANCEL: ON/OFF
Rotate the [VOLUME] knob to choose
Amplifier-Cancel function ON or OFF.
If you don't use internal amplifier, set it to ON.
DIMMER: ON/OFF
Rotate the [VOLUME] knob to choose
DIMMER oN or off.
• ON: LCD dimmer is active when small light
of vehicle is turned ON.
• OFF: LCD always maximum brightness
regardless of the vehicle small light.
BEEP: ON/OFF
Rotate the [VOLUME] knob to choose button
beep sound ON or OFF.
SVC LINK
Rotate the [VOLUME] knob to choose Service
Link mode.
• D A B - D A B : S w i t c h e s t o a d i f f e r e n t
frequency DAB station on the same network
if current DAB station signal becomes weak.
• DAB-FM: Switches to a different frequency

Audio Setup

Selecting speaker
When this product is turned on for the first
time or reseted. Rotate the [VOLUME]
knob to select the [INITIAL] and press
the [VOLUME] knob, then press [
] button to select : NORMAL / 2-WAY
or [
/3-WAY, it allows you to select a speaker
system.
8
CZ702E
FM station on the same network if current
DAB station signal becomes weak.
• D A B & F M : S w i t c h e s t o a d i f f e r e n t
frequency DAB station or FM station on the
same network if current DAB station signal
becomes weak.
• OFF: No switch.
Note:
If you wish to use the SERVICE LINK, please
set to ON the AF function.
DAB LBND: ON/OFF
When you want to listen DAB L-BAND(At
the region support DAB L-BAND), stations,
please set to ON.
Rotate the [VOLUME] knob to choose
L-BAND ON or OFF.
Speaker system
Speaker system Speaker configuration
NORMAL front 2ch Rear 2ch Subwoofer 2ch
]
2-WAY Mid 2ch High 2ch Rear 2ch
3-WAY Mid 2ch High 2ch Subwoofer 2ch
Audio Setup
• Normal speaker system (NORMAL)
Front speaker Front speaker
(left) (right)
Rear speaker Rear speaker
(left) (right)
Subwoofer
• 2way speaker system (2WAY)
High (Tweeter)
High (Tweeter)
(right)
(left)
Mid speaker
Mid speaker
(left)
(right)
Rear speaker
Rear speaker
(left)
(right)
• 3way speaker system (3WAY)
High (Tweeter)
High (Tweeter)
(left) (right)
Mid speaker
Mid speaker
(left)
(right)
Subwoofer
Setting the X-OVER(Crossover)
This function allows you to adjust the speaker
setting such as cutoff frequencies or slope
matched to the speakers you are using.
(Crossover).
Press and hold the [ ] button to enter
amplifier setting mode. Use the [ ] or [ ]
button to select an option.
Press [ VOLUME ] knob to confirm.
To return to the previous settings, press the
[ VOLUME ] knob again.
1. When speaker system is
"NORMAL".
• TIME ALIGNMENT
FRONT L/R: 0----501.4cm
REAR L/R: 0----501.4cm
SW L/R: 0----501.4cm
• HPF/LPF FRONT
- FR HPF
CUT: THROUGH / 60 / 90 / 120HZ
SLOP: -12DB
PHASE: NOR / REV
• HPF/LPF REAR
- REAR HPF
CUT: THROUGH / 60 / 90 / 120HZ
SLOP: -12DB
PHASE: NOR / REV
• HPF/LPF S-WOOFER
- SW LPH
CUT: THROUGH / 60 / 90 / 120HZ
SLOP: -12DB
PHASE: NOR / REV
2. When speaker system is "2WAY".
• TIME ALIGNMENT
HIGH L/R: 0----501.4cm
MID L/R: 0----501.4cm
REAR L/R: 0----501.4cm
• 2W XOVER
- HIGH HPF
CUT: 25HZ / 31.5HZ / 40HZ / 50HZ /
63HZ / 80HZ / 100HZ / 125HZ / 160HZ /
200HZ / 250HZ / 315HZ / 400HZ / 500HZ
/ 630HZ / 800HZ / 1K / 1.25K / 1.6K / 2K /
2.5K / 3.15K / 4K / 5K / 6.3K / 8K / 10.0K
/ 12.5K / 16K / 20K / THROUGH
SLOP: -6 / -12DB
- HIGH SPK: PHASE NOR/PHASE REV
- MID LPF
CUT: 630HZ / 800HZ / 1K / 1.25K / 1.6K
/ 2K / 2.5K / 3.15K / 4K / 5K / 6.3K / 8K /
10.0K / THROUGH
SLOP: -6 / -12DB
- MID HPF
CUT: 25HZ / 31.5HZ / 40HZ / 50HZ /
63HZ / 80HZ /1K / 1.25K / 1.6K / 2K /
2.5K / 3.15K / 4K / 5K / 6.3K / 8K / 10.0K
/ THROUGH
SLOP: -6 / -12DB
- MID SPK: PHASE NOR/PHASE REV
- REAR LPF
CUT: 25HZ / 31.5HZ / 40HZ / 50HZ /
63HZ / 80HZ / 100HZ / 125HZ / 160HZ /
200HZ / 250HZ / 315HZ / 400HZ / 500HZ
/ 630HZ / 800HZ / 1K / 1.25K / 1.6K / 2K /
2.5K / 3.15K / 4K / 5K / 6.3K / 8K / 10.0K
/ THROUGH
SLOP: -6 / -12DB
- REAR HPF
CUT: 16HZ / 20HZ / 25HZ / 31.5HZ /
40HZ / 50HZ / 63HZ / 80HZ / 100HZ
/ 125HZ / 160HZ / 200HZ / 250HZ /
THROUGH