Audio Adjustments; Operation - Clarion PU1573 Beschreibung

OPERATION

MAIN OPERATIONS
IMPORTANT Turn the volume down be-
fore turning the sound system off. Sound
quality will be perfect and the sound system
will not be damaged when you turn it back
on.
Turning the sound system on
and adjusting the volume
1. Press the (POWER) button [2] to turn
the sound system on. Press the (POWER)
button for at least one second to turn the
sound system off.
2. Press the function button (FUNC) [2]
to select Radio, Tape and CD functions cycli-
cally as follows:
Radio ➞ Tape ➞ CD ➞ Radio.
The message "NO CASS" will appear if
there is no tape in the player.
The message "NO DISC" will appear if
there is no CD in the magazine or if the CD
player is not connected.
34
3. Press the up/down buttons [3] to ad-
just the volume.
N: to turn volume up;
O: to turn volume down.

Audio adjustments

1. Press the audio mode (A-M) [1] to se-
lect the mode required. The mode changes
each time the (A-M) button is pressed as fol-
lows:
BASS/TREB (bass/treble) ➞ BAL/FAD (bal-
ance/ader) ➞ previous mode.
2. Adjust bass and treble with the
left/right and the up/down buttons [19],
[3].
BASS ADJUSTMENT
G: Decrease bass;
H: Increase bass.
TREBLE ADJUSTMENT
N: Increase treble
O: Decrease treble
3. Adjust balance and fader with the
left/right and up/down buttons [19], [3].
BALANCE ADJUSTMENT
G: Increase left speaker sound;
H: Increase right speaker sound.
FADER ADJUSTMENT
N: Increase front speaker sound;
O: Increase rear speaker sound.
LOUDNESS
Keep the loudness button (LOUD) [1]
pressed for longer than 2 seconds to acti-
vate/deactivate this function. The message
"LD" will appear on the display when the
function is on.
MUTE FUNCTION
This function will automatically turn the vol-
ume down to zero.
Press the MUTE [14]. The sound will dis-
appear and the message "MUTE" will ap-
pear on the display. Press the MUTE but-
ton again to turn the function off.