Option Menu - Yamaha RX-V365 Bedienungsanleitung

B)INPUT RENAME
Input rename
Use this feature to change the name of the input source
that appears on the front panel display.
The following is an example where "DVD" is renamed
"My DVD."
DVR V-AUX
DVD My DVD
1
Press one of the input selector buttons (e)
or fMULTI CH IN to select the input
source you want to change the name of.
2
Press ol / h on the remote control to place
the "_" (underscore) under the space or the
character you want to edit.
3
Press ok / n to select the character you
want to use and then press ol / h to move
to the next space.
Notes
• You can use up to 8 characters for each input.
• Press on to change the character in the following order, or press
ok to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, symbols (#, *, –, +,
etc.)
4
Repeat steps 1 through 3 to rename each
input source.
5
Press kMENU to exit from "INPUT
RENAME."
C)VOLUME TRIM
Volume trim
Use this feature to adjust the level of the signal input at
each jack. This is useful if you want to balance the level of
each input source to avoid sudden changes in volume
when switching between input sources.
Press one of the input selector buttons (e) or
vMULTI CH IN to select the input source you
want to adjust the level.
Choices: CD, TUNER, MD/CD-R, DVD, DTV/CBL,
V-AUX, DVR, MULTI CH IN
Control range: –6.0 dB to 0.0 dB* to +6.0 dB
Control step: 1.0 dB
pDVD
DTV/CBL MD/CD-R TUNER CD
D)DECODER MODE
Decoder mode
■
Decoder select mode
Use this feature to designate the default decoder mode for
the input sources connected to the DIGITAL INPUT
jacks.
Choice
AUTO*
Automatically detect the type of input signals and
selects the appropriate decoder mode.
LAST
Automatically select the last decoder mode used the
connected input source.
■
DTS decoder prioritize setting
Choice
AUTO*
Automatically detect the type of input signals and
selects the appropriate input mode.
DTS
Enables to playback a DTS-CD.
Multi channel input setup
E)MULTI CH SET
■
BGV
BGV
Use this feature to select the video source played in the
background of the sources input from the MULTI CH
INPUT jacks.
Choices: LAST*, DVR, V-AUX, DTV/CBL, DVD
y
• Select "LAST" to set this unit to automatically select the last selected
video source as the background video source.

3 OPTION MENU

Use this menu to adjust the optional system parameters.
y
• Initial settings are indicated by (*) in this following each parameter.
A)DISPLAY SET
Display settings
■
DIMMER
Dimmer
Use this feature to adjust the brightness of the front panel
display.
Control range: –4 to 0*
Control step: 1
• Press ol to make the front panel display dimmer.
• Press oh to make the front panel display brighter.
B)MEMORY GUARD
Memory guard
■
MEM.GUARD
Memory guard
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Choice
OFF*
Turns off the "MEM.GUARD" feature.
ON
Protects:
– sound field program parameters
– all set menu items
– SCENE template parameters
Set menu
Function
Function
Function
35
En