Advanced Operation - Yamaha RX-V365 Bedienungsanleitung

ADVANCED OPERATION

You can use the following parameters in the set menu to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings to reflect the needs of your listening environment.
AUTO SETUP
Auto setup
Use this feature to automatically adjust speaker and system parameters (see page 16).
Manual setup MANUAL SETUP
Use this feature to manually adjust speaker and system parameters.
■
1 SOUND MENU
Sound menu
Use this menu to manually adjust any speaker settings, alter the quality and tone of the sound output by the system or
compensate for video signal processing delays when using LCD monitors or projectors.
Parameter
A)SPEAKER SET
Selects the size of each speaker, the speakers for low-frequency signal output, the crossover frequency,
and the location of the front speakers connected to the FRONT B terminals.
B)SP LEVEL
Adjusts the output level of each speaker.
C)SP DISTANCE
Adjusts the distance of each speaker.
D)CENTER GEQ
Adjusts the tonal quality of the center speaker.
E)LFE LEVEL
Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
F)D.RANGE
Adjusts the dynamic range of Dolby Digital or DTS signals.
G)AUDIO SET
Adjusts the muting level, audio delay settings, maximum volume level and initial volume level.
■
2 INPUT MENU
Input menu
Use this menu to manually reassign the input jacks, select the input mode or rename the input source.
Parameter
A)INPUT ASSIGN
Assigns the input jacks on this unit according to the component to be used.
B)INPUT RENAME
Changes the name of the input source.
C)VOLUME TRIM
Adjusts the output volume of each jack.
D)DECODER MODE
Selects the decoder mode for the sources connected to the DIGITAL INPUT jacks on the rear panel of
this unit.
E)MULTI CH SET
Select the video source played in the background of the sources input from the MULTI CH INPUT jacks.
■
3 OPTION MENU
Option menu
Use this menu to manually adjust the optional system parameters.
Parameter
A)DISPLAY SET
Adjusts the brightness of the front panel display.
B)MEMORY GUARD
Locks sound field program parameters and other set menu settings.
C)AUDIO SELECT
Designates the default audio input jack select setting mode for the input sources connected to the
DIGITAL INPUT jacks when you turn on the power of this unit.
D)PARAM. INI
Sets all the parameters of the sound field programs to the initial factory settings.
Signal information
Use this feature to check audio signal information (see page 21).
Set menu
SIGNAL INFO
Features
Features
Features
Page
32
33
33
33
34
34
34
Page
34
35
35
35
35
Page
35
35
36
36
31
En