Quick Start Guide - Yamaha RX-V365 Bedienungsanleitung

The following steps describe the easiest way to operate this unit. See the related pages for details on the operation and
settings.
Step 1: Check the items
In these steps, you need the following items which are not
included in the package of this unit.
❏ Speakers
We recommend magnetically shielded speakers.
❏ Front speaker ..................................... x 2
At least two front speakers are required to start
playback.
❏ Center speaker ................................... x 1
❏ Surround speaker .............................. x 2
❏ Active subwoofer ................................... x 1
Select an active subwoofer equipped with an RCA
input jack.
❏ Speaker cable ......................................... x 5
❏ Subwoofer cable ..................................... x 1
Select a monaural RCA cable.
❏ DVD player .............................................. x 1
Select DVD player equipped with coaxial digital
audio output jack and composite video output jack.
❏ Video monitor ......................................... x 1
Select a TV monitor, video monitor or projector
equipped with a composite video input jack.
❏ Video cable ............................................. x 2
Select an RCA composite video cable.
❏ Digital coaxial audio cable .................... x 1
Step 2: Set up your speakers
Place your speakers in the room and connect them to this
unit.
Front right
speaker
Video monitor
Front left
speaker
Center speaker
DVD player
Surround left
speaker
• Placing speakers
• Connecting speakers

Quick start guide

Subwoofer
Surround right
speaker
☞P. 9
☞P. 9
Step 3: Connect your components
Connect your TV, DVD player or other components.
• Connecting a TV monitor or projector
• Connecting audio and video components
• Connecting a multi-format player or an external
decoder
• Using the VIDEO AUX jacks on the front panel
• Connecting the FM and AM antennas
Step 4: Turn on the power
Connect the power cable and turn on this unit.
• Connecting the power cable
• Turning on and off the power
Step 5: Select the input source and start
playback
Select the component connected in the step 3 as an input
source and start playback.
• Basic procedure
• Selecting the SCENE templates
• Adjusting the sound field programs
☞P. 12
☞P. 13
☞P. 14
☞P. 14
☞P. 15
☞P. 15
☞P. 15
☞P. 18
☞P. 22
☞P. 25
7
En