Skipping Over Some Steeping Time - Gastroback Design Tea Aroma Plus Bedienungsanleitung

Note
You may remove the kettle from the power base after steeping to pour some tea.
The keep warm function keeps running (see: 'Keep Warm Function'). However,
the heating elements will be switched off, when the kettle is removed. After re-
placing the kettle, the "Start/Stop" button flashes. Shortly press the "Start/Stop"
button to re-assume keep warm operation. Otherwise, the tea will cool down.
Important: If you wish to keep the reminder of tea still warm after pouring, always
ensure that a sufficient filling level is still left within the kettle (at least 500 ml).
8. If you wish to switch off the appliance after preparing your tea, hold the "Start/
Stop" button pressed until the signal sounds. The appliance returns to standby
mode immediately.
9. When removing the kettle from the power base after steeping to pour some tea,
you may re-assume keep warm operation. For this, ensure that at least 500ml
tea are still left in the kettle. Re-place the kettle on the power base and SHORTLY
press the "Start/Stop" button. After the maximum keep warm time (30 minutes)
elapsed, the appliance switches back to standby mode automatically and a
signal sounds.
Note
For saving energy, please avoid leaving the keep warm function running uselessly.

Skipping Over Some Steeping Time

You may shorten the steeping time and switch to the keep warm function manually,
while the steeping process is still running. To do this, during steeping, hold the flas-
hing button of the selected tea program pressed until a signal sounds (approx. 2
seconds). The appliance switches to the keep warm function immediately.
55