Adding Water During Operation - Gastroback Design Tea Aroma Plus Bedienungsanleitung

ADDING WATER DURING OPERATION

If the filling level within the kettle drops below the MIN filling level (500ml) during
operation, you need to pour some water into the kettle, if you wish to operate the
kettle. With the keep warm function running, the water within the kettle will be re-
heated to the selected temperature automatically.
CAUTION:
when the kettle is hot. When adding water during operation, always pour the
water slowly into the middle of the kettle. Otherwise, the glass could crack! Please
observe the maximum filling level (1200 ml).
1. Remove the lid from the lid ring.
2. Pour the required amount of water slowly into the middle of the kettle, without
letting the cold water run down at the side walls of the kettle.
3. Lock the lid in the lid ring. The kettle will heat the water up to the set temperature
and carry on executing the running program as normal.
58
Do not let cold water run down at the side walls of the kettle,