Hilti PMC 36 Bedienungsanleitung Seite 20

The PMC 36 is characterized by its ease of operation and use, its rugged plastic casing and ease of transport
due to its compact dimensions and light weight.
The tool can be used together with the PMA 30 laser receiver.
In the normal operating mode, the tool switches itself off after 15 minutes. Sustained operating mode can be
activated by pressing and holding the on-switch for four seconds.
2.3 Items supplied with the cardboard box version
1 Combilaser
1 Soft pouch
4 Batteries
1 Operating instructions
1 Laser visibility glasses
2 Target plate
1 Manufacturer's certificate
2.4 Items supplied with the toolbox version
1 Combilaser
1 Soft pouch
4 Batteries
1 Operating instructions
1 Pipe adapter
1 Wall mount
1 Frame clamp
1 Magnetic bracket
2 Target plate
1 Manufacturer's certificate
2.5 Information displayed during operation
LED
Laser beam
Printed: 07.07.2013 | Doc-Nr: PUB / 5071411 / 000 / 00
The LED doesn't light.
The LED doesn't light.
The LED doesn't light.
The LED lights con-
stantly.
The LED blinks.
The LED blinks.
The laser beam blinks
twice every 10 seconds.
The laser beam blinks
rapidly.
The laser beam blinks
slowly.
The tool is switched off.
The batteries are exhausted.
The batteries are inserted incorrectly.
The laser beam is switched on. The tool is in opera-
tion.
The batteries are almost exhausted.
The temperature of the tool is greater than 50°C
(122°F) or less than -10°C (14°F) (the laser beam
does not light).
The batteries are almost exhausted.
The tool cannot level itself (outside the 3.5° self-
leveling range).
Movement of the pendulum is blocked. The foot of
the tool is in the closed position.
en
15