Beko CEG7425B Bedienungsanleitung Seite 49

6 Cleaning and maintenance
You can only
C
dispense coffee
again when cleaning
has been performed.
You can cancel the
C
cleaning program at
any time by pressing
OK (button 6).
A milk system clean-
C
ing solution can be
bought in specialist
shops.
The symbols "Milk system cleaning"
and "Milk froth" flash in the display.
1. Fill a receptacle with 200 ml of
water and the appropriate quan-
tity of cleaning solution for the
milk system (refer to notes on
the cleaning solution).
Fully Automatic Coffee Maker / User Manual
2. Insert the milk tube down to the
bottom of the container with
the cleaning solution. Open the
rotary switch for milk froth/hot
water.
The cleaning solu-
tion is fed into the
C
appliance via the milk
tube and discharged
via the outlet unit
into the drip tray.
3. After the run is complete, empty
the container with the cleaning
solution, rinse and fill with
200 ml fresh water to rinse the
system.
4. Insert the milk tube down to the
bottom of the container.
5. Push OK (button 6).
49 / 233 EN