Beko CEG7425B Bedienungsanleitung Seite 42

Operation and use
5
5. After rinsing is complete, empty
the container with the cleaning
solution, rinse and fill with
200 ml fresh water to rinse the
system.
6. Insert the milk tube down to the
bottom of the container.
7. Press OK (button 6).
8. After rinsing is complete, close
the milk froth/hot water rotary
switch.
– The appliance switches back to
operating mode after several
seconds.
42 / 233 EN
C
– Milk residue must also be
cleaned from the outlets on the
dispenser unit each time a milk
coffee speciality is dispensed.
Fully Automatic Coffee Maker / User Manual
If several drinks are
prepared with milk,
the milk system should
be subsequently
cleaned. Otherwise
the program
prompt cleaning
when the appliance is
switched on again. It
is then not possible to
select a drink.
will