Beko CEG7425B Bedienungsanleitung Seite 40

Operation and use
5
If the height adjuster
is difficult to move,
C
clean it. Proceed as
described in section
6.5.
4. Open the rotary switch for milk
froth/hot water (13).
5. Put as much milk froth into the
glass as required by taste and
preparation mode.
6. You can stop the milk froth
output at any time by closing the
rotary switch for milk froth/hot
water (13).
7. In order to add the required
quantity of coffee, select the
corresponding cup symbol by
pressing button 4.
If "Coffee powder"
C
is selected, only one
cup can be used.
40 / 233 EN
C
8. Press OK (button 6) to obtain
coffee.
C
Fully Automatic Coffee Maker / User Manual
The standard filling
amounts or
individual
amounts you set in
Chapter 5.11 Changing
and saving the cup
filling level in bean
mode or 5.13 Changing
and saving the cup
filling level in powder
mode also apply in
this mode. If you want
to change the cup fill
quantity, you can find
the information in the
chapters mentioned
above.
You can cancel coffee
output at any time
by pressing OK again
(button 6).
the
filling