Thermostat Setting Button - Grundig GKN 27930 FX Bedienungsanleitung

5.4 Thermostat setting button

The operating temperature is
regulated by the temperature
control.
W
1=Lowest cooling setting (Warmest
setting).
4=Highest cooling setting (Coldest
setting).
The average temperature inside the
fridge should be around +5°C.
Please choose the setting according
to the desired temperature.
Please note that there will be
different temperatures in the cooling
area.
The coldest region is immediately
above the vegetable compartment.
The interior temperature also
depends on ambient temperature,
the frequency with which the door is
opened and the amount of foods kept
inside.
Frequently opening the door causes
the interior temperature to rise.
16
For this reason, it is recommended
to close the door again as soon as
possible after use.
5.5 Thermostat setting button
The interior temperature of your
refrigerator changes for the following
reasons;
Seasonal temperatures,
Frequent opening of the door and
leaving the door open for long
periods,
Food put into the refrigerator
without cooling down to the room
temperature,
The location of the refrigerator
C
in the room (e.g. exposing to
5
sunlight).
You may adjust the varying interior
temperature due to such reasons
by using the thermostat. Numbers
around the thermostat button
indicates the cooling degrees.
If the ambient temperature
is higher than 32°C, turn the
thermostat button to maximum
position.
If the ambient temperature
is lower than 25°C, turn the
thermostat button to minimum
position.
May not be available in all models