Using Your Refrigerator; Thermostat Setting Button - Grundig GTMU 14110 Bedienungsanleitung

5. Using your refrigerator

5.1 Thermostat setting button

The operating temperature is
regulated by the temperature
control.
Warm
1 2
(Or) Min.
1 = Lowest cooling setting
(Warmest setting)
5 = Highest cooling setting
(Coldest setting)
(Or)
Min. = Lowest cooling setting
(Warmest setting)
Max. = Highest cooling setting
(Coldest setting)
The average temperature inside
the fridge should be around +5°C.
Please choose the setting
according to the desired
temperature.
Please note that there will be
different temperatures in the
cooling area.
The coldest region is immediately
above the vegetable compartment.
Figures in this user manual are schematic and may not
C
match the product exactly. If the subject parts are not
included in the product you have purchased, then those parts
are valid for other models.
Cold
3 4 5
Max.
The interior temperature also
depends on ambient temperature,
the frequency with which the door
is opened and the amount of foods
kept inside.
Frequently opening the door
causes the interior temperature to
rise.
For this reason, it is recommended
to close the door again as soon as
possible after use.
The interior temperature of your
refrigerator changes for the
following reasons;
•
Seasonal temperatures,
•
Frequent opening of the door
and leaving the door open for
long periods,
•
Food put into the refrigerator
without cooling down to the
room temperature,
•
The location of the refrigerator
in the room (e.g. exposing to
sunlight).
•
You may adjust the varying
interior temperature due to
such reasons by using the
thermostat. Numbers around
the thermostat button indicates
the cooling degrees.
•
If the ambient temperature
is higher than 32°C, turn the
thermostat button to maximum
position.
•
If the ambient temperature
is lower than 25°C, turn the
thermostat button to minimum
position.
IT
DE
15