Safety Information - Heidolph UNIMAX 1010 Betriebsanleitung

IEI
For using the item in a country with deviating outlet / plug systems, we recommend
to use approved adapters or to have an electrician replace the standard plug with
one suiting your needs.
As shipped, the item features a protective ground wire. When replacing the original
plug, make sure to reconnect this protective ground wire in the new plug !
Please comply with all safety and accident-prevention regulations as in force
for laboratory work!
Use extra care when working with flammable substances; refer to safety data
sheets.
Use extra care when working in the vicinity of flammable and explosive
substances. Motors are non-sparking; however, the item itself is not
explosion-proof.
When connecting your item with your local power supply, please make sure
your item is wired for your local voltage. Refer to the data plate on the item.
Please connect your unit with a protective-ground outlet only.
Turn your power switch OFF whenever the item is not in use, or before
disconnecting the plug.
Repair work is limited to technicians approved by Heidolph Instruments.
Your item needs a solid stand.
Lab bench needs to be of rigid design, and feature an anti-skid surface coat.
Before starting the item, make sure all vessels are attached safely (must not
move while shaking).

SAFETY INFORMATION

18