Duomax 1030 / Polymax 1040; Warranty, Liability & Copyright - Heidolph UNIMAX 1010 Betriebsanleitung

IEI
DUOMAX 1030
shaker frequency
angle
motion type
load-bearing capacity
timer
POLYMAX 1040
shaker frequency
total stroke / orbit
motion type
load-bearing capacity
timer
When running with off-center loads, refer to limitation of load illustrated in the
-
diagram below.
Load
(kg)
5,0
4,0
3,0
2,0
1,0
0,0
C&G offset (mm)
Warranty
Heidolph Instruments warrants that the present product shall be free from defects in material
(except wear parts) and workmanship for 3 years from the date shipped off the
manufacturer's warehouse.
Damage in transit is excluded from this warranty.
To file for such warranty service, contact Heidolph Instruments (phone ++49-9122-9920-68)
or your local Heidolph Instruments Dealer. If defects in material or workmanship are found,
your item will be repaired or replaced at no charge.
Misuse, abuse, neglect or improper installation are not covered by this warranty.
Alterations to the present warranty need Heidolph Instruments' consent in writing.
Exclusion Clause
Heidolph Instruments cannot be held liable for damage from improper use or misuse.
Remedy for consequential damage is excluded.
Copyright
Copyright in pictures and wording of the present Instruction Manual is held by Heidolph
Instruments.
2 – 50 1/min (fig. 14)
5° / 10 °
rocking
static: 5 kg, limitations for off-center load
timer 0 – 120 min / continuous
2 – 50 1/min (fig. 14)
5° / 10 °
tumbling
static: 5 kg; static: 5 kg, limitations for off-center load
timer 0 – 120 min / continuous

DUOMAX 1030 / POLYMAX 1040,

eccentric load admissible
0 20 40
WARRANTY, LIABILITY & COPYRIGHT
60 80 100
26
undue range
120 140