Safety Information; Set-Up; Electric Hook-Up; Secure Vessels - Heidolph REAX 2 Betriebsanleitung

E
Please comply with all safety and accident-prevention regulations as in force for
laboratory work!
Use extra care when working with flammable substances; refer to safety data
sheets.
Use extra care when working in the vicinity of flammable and explosive substances.
Motors are of non-sparking type, the item itself however is not explosion-proof.
When connecting your item with your local power supply, please make sure your
item is designed for your local voltage; go by the data plate on the item.
Please connect your item with a protective-ground outlet only.
Turn your power switch OFF whenever the item is not used, or before disconnecting
the plug.
Repair work is limited to technicians approved by Heidolph Instruments.
Your item needs a solid stand.
Lab bench needs to be of rigid design, and features an anti-skid surface coat.
Before starting the item, make sure all samples are attached safely (must not move
while shaking).

1. Set-up

Please locate the shaker on a stable, horizontal surface. For reasons of safety, keep the area
around the machine clear of other items.
Be aware of orbital movement of the shaker rotor and vessel set-ups protruding over the standard
rotor surface.

2. Electric hook-up

Connect mains plug

3. Secure vessels

There are two adapters available to meet with a wide range of applications.

SAFETY INFORMATION

SET-UP
14