Functional Overview - Wetekom 81 83 50 Bedienungsanleitung

Using
Warning!
To avoid harms to you or damages to the meter from electric
shock, please do not attempt to measure voltages higher than
250 V AC (alternating current) although readings may be
obtained. This can lead to damage of the unit or to electric
shocks with serious health problems. Be extremely careful when
measuring high voltages!

3. Functional Overview

This section describes the features, controls and displays of the
multimeter.
(1) Display
3 ½ digit LCD (max. reading of 1.999)
(2) Rotary Function/Range Switch
It can be used to select the desired function and range as well as
to turn on and off the meter. If you do not use the meter, set this
switch to "OFF".
(3) 10 A Jack
Socket for the red test lead for current measurements (200
mA to 10 A ). Turn the rotary function switch (2) to the 10 A
position.
(4) VΩmA Jack
Socket for the red test lead for all measurements except current
measurements (> 200 mA ).
(5) COM Jack
Earth reference point for all types of measurements. The black
test lead is connected to this jack and to the earth point of the
device under test.
(6) Test Leads/Measuring Probes
28