6. Features
•
No software is necessary for operation
•
Conversion of a VGA signal of a VGA graphic card into a video signal (FBAS, S-Video, RGB Scart)
•
The operation of the AV receiver is necessary only if you wish to transmit the AV signal (FBAS video signal and
stereo audio signal) wireless.
•
Operation (wireless AV transmission) also possible without computer; to that effect, a video and audio input is
available on the transmitter of the converter.
•
2.4GHz technology
•
Various transmission channels selectable (e.g. by interferences)
•
Simultaneous display of VGA picture, video picture (FBAS or S-Video or RGB) and radio AV signal.
•
PAL/NTSC reversible
•
Various setup possibilities for the video signal
•
Range in free field up to 100m, inside buildings up to 30m.
To that effect, please note chapter 13.
•
Power supply for transmitter and receiver via plug-in mains unit
•
Also suitable for higher resolutions (e.g. 1280*1024)
Higher resolutions on the connected AV device are however conditionally usable since, for example,
screen fonts, symbols or icons are hardly discernable; the resolution of a conventional TV set is not
intended for that purpose.
25