Conrad Grand Ultimate Wireless Bedienungsanleitung Seite 22

• When the product is brought from a cold into a warm room (e.g. during transport) condensation may
form. This could damage the product. With the plug-in mains unit there is also the deadly peril of an
electric shock!
This is why you should always let the product get to room temperature before you use it or connect
the plug-in mains units to the mains voltage. This can sometimes take several hours.
• Never touch the plug-in mains units when your hands are damp or wet. Danger of a life-threatening
electric shock!
• Do not leave packaging material unattended. It might become a dangerous toy for children!
• Use the device only in moderate climate regions and not in tropical climate.
• Do not place any open fire sources such as burning candles on the device or in its proximity.
• Do not place any containers with liquid, e.g. buckets, vases or plants in the immediate proximity of
the product. Liquid could get inside the housing and impair electrical safety. There is furthermore a
high risk of fire or of a life-threatening electric shock.
If this is the case, de-energize the respective socket (e.g. switch off circuit breaker) and only then
pull the plug-in mains unit from the socket. Afterwards, the product must no longer be used, bring
it to a specialist workshop.
• Do not pull the plug-in mains unit from the mains socket by pulling the cable. Hold it with one hand
on the left and right, pull it out of the socket in a straight line (exactly the opposite way as when it was
plugged in).
• Do not bend the cables and do not place objects on them.
• Should the plug-in mains unit show any damages, don't use it anymore!
If it is already in the mains socket, de-energize the socket first (e.g. via the respective circuit-breaker)
before you pull the plug-in mains unit out of the mains socket. Do not use the product anymore
afterwards but bring it to a specialized workshop.
• In industrial facilities, the safety regulations laid down by the professional trade associations for
electrical equipment and facilities must be adhered to.
• If the product is used at schools, training facilities, do-it-yourself and hobby workshops it should not
be handled unless supervised by trained, responsible personnel.
• Handle the product carefully and do not drop it, knocks, blows or even a fall from a low height can
damage it.
24