Safety Notes; Intended Use; General Safety Instructions - Rothenberger PIPECUT TURBO 400 Bedienungsanleitung

Markings in this document:
!
!
1

Safety Notes

1.1

Intended use

The circular pipe saw manufactured by ROTHENBERGER is manufactured under quality control
and complies with the requirements of the European market.
The circular pipe saw manufactured by ROTHENBERGER is designed to cut pipes made of all
types of metal and plastic, including carbon steel, steel alloys, stainless steel, copper, aluminium
and all types of plastic.
THE CIRCULAR PIPE SAW IS DESIGNED FOR PROFESSIONAL USE ONLY.
1.2

General safety instructions

This manual provides the instructions necessary for the installation, storage, operation and
maintenance of your recently acquired circular pipe saw. We recommend you read these
instructions carefully before starting up the circular pipe saw.
All of the instructions given in this manual entail the use of the circular pipe saw under suitable
working conditions, without modifications to its original design. Any alterations or modifications to
the circular pipe saw are strictly prohibited without written approval from ROTHENBERGER.
NOTE - This manual indicates the basic instructions you must follow during the installation,
operation and maintenance of the circular pipe saw. Therefore it is imperative that the staff/
operator responsible reads this manual before assembling the saw. In addition, it must be
available at the location of the circular pipe saw.
This document contains information owned by ROTHENBERGER which is protected by the
manufacturer's rights. All rights reserved. No part of this document may be copied or reproduced,
without the prior written consent of ROTHENBERGER. Violation of this is punishable according
to article 534 of the penal code with fines and imprisonment. To guarantee perfect operation, you
must read this document carefully.
The manufacturer shall not be held liable for any damage that may be caused, either to
installations or to people, should the circular pipe saw be used for any activities other than
those described below.
NON-COMPLIANCE WITH THE SAFETY PRECAUTIONS INDICATED IN THIS
!
MANUAL CAN DAMAGE THE CIRCULAR PIPE SAW OR PROPERTY AND CAUSE
PERSONAL INJURY.
As a general rule, we recommended the following for correct use of the circular pipe saw:
1. Safety in the work area
• Keep the work area clean and tidy. Untidy or dirty areas are more likely to cause accidents.
• Keep children and spectators away when using the power tool. Distractions can make you
lose control of the saw.
2. Electrical safety
• The plugs of power tools must fit in the sockets. Do not modify the plugs under any
20
Danger!
This sign warns against the danger of personal injuries.
Caution!
This sign warns against the danger of property damage and damage to the
environment.
Call for action
ENGLISH