Cleaning, Maintenance And Repair; Service Addresses; Service Intervals - NovoPress AXI102 Betriebsanleitung

10

Cleaning, maintenance and repair

CAUTION!
Risk of injury when cleaning or carrying out maintenance work due to
pressing the On switch unintentionally.
Therefore:
– Comply with the safety instructions and always remove the battery (Fig. 4) before
performing cleaning, maintenance or repair work.

Service addresses

You can find the addresses of authorised specialist workshops on the "Service addresses" sheet
provided or at www.novopress.de.

Service intervals

Service and repair work may only be carried out by Novopress or the authorised NOVOPRESS
specialist workshops.
The next service is indicated by means of an inspection sticker on the expander/pusher tool. This
sticker, the colour of which is changed each year, indicates the date of the next service
(month/year). This applies both to new devices and components and to the individual service
intervals for the equipment.
Routine inspection (before use, at the start of the working day) and when soiled
(Fig. 14+15)
Check for visible damage, material cracks and other signs of wear. If defects are found, do not use
the device and have it repaired.
Expander
• Clean expander head.
• Clean and grease ram/expander cone.
Pusher tool
• Clean all adaptors completely with a solvent.
• Remove deposits from the contours of the adaptors.
• Clean the contours of the adaptors with a solvent.
• Lubricate the pusher tool bolts with machine oil.
• Clean and grease the guide rod.
25
AXI102/AAP102
EN