NovoPress AXI102 Betriebsanleitung Seite 26

AXI102/AAP102
7.1.1 Automatic press cycle (Fig. 1)
EN
The expander features positive control. During expansion, the expander remains in the position
reached, even if the start button (1) is temporarily released. When the intended switch-off force is
achieved, it is perceptible by means of an increase in the motor speed and a discernible decrease
in pressure. When the start button (1) is released, the device returns to its initial position. For safety
reasons, the positive control is only activated after a minimum force has been attained. Until this
force is achieved, the expansion process can be interrupted at any time by releasing the start
button (1). The device then automatically returns to its initial position.
7.1.2 Release button (4) (Fig. 1)
The release button (4) is used to return the tool to its initial position before the expansion process
has been completed. In order to do this, press the release button (4) until the expander head (3)
has moved back completely.
7.2 AAP102 pusher tool (Fig. 2)
1. Start button
2. Battery
3. Pusher adapter
4. Release button
7.2.1 Automatic press cycle (Fig. 2)
The pusher tool features positive control. During compression, the pusher tool remains in the
position reached, even if the start button (1) is temporarily released. When the intended switch-off
force is achieved, it is perceptible by means of an increase in the motor speed and a discernible
decrease in pressure. When the start button (1) is released, the device returns to its initial position.
For safety reasons, the positive control is only activated after a minimum force has been attained.
Until this force is achieved, the pressing operation can be interrupted at any time by releasing the
start button (1). The device then automatically returns to its initial position.
7.2.2 Release button (4) (Fig. 2)
The release button (4) is used to return the tool to its initial position before the pressing operation
has been completed. In order to do this, press the release button (4) until the pusher adaptor (3)
has moved back completely.
7.2.3 Rotatable head (Fig. 2)
The pusher tool is equipped with a rotatable head. It cannot be rotating during the pressing
operation.
7.2.4 Pusher adaptor (Fig. 3)
The nominal width and the name of the system supplier are inscribed on the pusher adapters.
Furthermore, an arrow indicates the installation direction and a number indicates the order. If the
nominal widths for a size are aligned with each other, the arrows and the numbers will be in line.
20