Inhaltsverzeichnis
Werbung
MIDI Transmit Channel Selection
The MIDI standard allows transmission and reception of MIDI
data on 16 different channels. This large number of channels
allows selective control of certain instruments or devices
connected in series with others.
For exampie, a single MIDI sequence recorder could be used
to "play" two different tone generators. One of the tone
generators would be set to receive only on channel 1, while
the other would receive only on channel 2. This arrangement
would allow the sequence recorder to control two completely
different parts played by the tone generators.
The DD-14 can be set to transmit notes on any of the sixteen
channels. In addition, the ten melody percussion instruments
are each assigned their own transmit channels. Generally
speaking, the transmit channel for the currently selected DD-
14 instrument should be set to match the receive channel
setting of the receiving MIDI device.
To change the transmit channel, simultaneously press and
hold
both
of
the
PAD/PEDAL
current MIDI transmit channel number will appear in the
display (T). While still holding the PAD/PEDAL ASSIGN
buttons, use the number buttons @ to enter the new channel
number. As always, enter two digits—not just one—to specify
the channel number.
If the default channel setting has not been changed,
the letters "co" will appear in the display. (Please refer
to page 63 for details regarding default settings.)
67
ASSIGN
buttons
The
MIDI
O
O-LQ + !
PAD/PEDAL
O
ASSIGN g
Wahl des MIDI-Übertragungskanals
O
O
O
O
2
4
3
5
[>
J
«
O
O
O
O
7
8
9
0
- Quicklinks:
- MIDI-Funktionen
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
