Step Recording; Schrittweise Aufnahme - Yamaha DD-14 Bedienungsanleitung

5.2 Step Recording

In addition to the realtime recording method described in the
previous section, the DD-14 also allows you to use a step
recording method. This method is rather more complex than
realtime recording, but it allows you to specify chord changes
with greater ease and accuracy.
1. Press the CHORD MEMORY PLAY button @ for the song
you want to record while holding the RECORD button
The indicator for the selected song will flash, indicating
that the DD-14 is in record ready mode.
Note: Be sure that the song you select does not contain
song data you wish to keep. Any data already
recorded for the song in question will be erased
when the DD-14 enters record ready mode.
2. Start recording. You can press the INTRO/ENDING button
©—preceded by a chord, if you so desire—to begin the
song with an intro pattern. Otherwise, begin playing
chords using the method described at the end of this
section.
As you proceed with the recording, the numbers in the
display will change constantly to indicate the measure and
beat you are going to record next. The left digit is the ones
digit of the measure, while the right digit shows the beat.
53
— CHORD MEMORY—
o o O O
RECORD 1
STYLE/PERC. SET/SCR,
/ \
ONES DIGIT OF MEASURE
Taktnummer

5.2 Schrittweise Aufnahme

O
O
2 3
"BEAT
Taktschlag