• Before connecting or disconnecting cables/devices, the camera has to be switched off.
- Always check the product for damage every time before using it. If you notice any damage, do not connect
the camera to the mains voltage and do not operate it!
- Safe operation must be presumed to be no longer possible, if
- the device is visibly damaged,
- the device does not operate any longer and
- the device was stored under unfavourable conditions for a long period of time or
- it has been subjected to considerable stress in transit.
• If the product is not in use for a longer period of time (e.g. storage), switch it off.
10. Maintenance and cleaning
None of the components inside this product need to be serviced by the user. Therefore
never open it. Any maintenance or repair and the ensuing opening of the product may on-
ly be carried out by an expert or a specialist workshop.
Before carrying out any cleaning, the product is to be separated from the mains voltage,
pull the plug-in power supply from the mains socket.
37