Maintenance And Cleaning - Conrad Electronic 75 11 56 Bedienungsanleitung

- Extreme cold or heat
- Direct sunlight
- Dust or combustible gases, vapours or solvents
- Strong vibrations
- Strong magnetic fields such as those found in the vicinity of machinery or
loudspeakers
• When assembling the device, make sure the cables are not flexed or squashed.
• Always check the product for damage every time before using it. If you detect
any damage, DO NOT connect the product to the mains voltage! This constitutes
a danger to life.
• Safe operation must be presumed to be no longer possible, if
- the device is visibly damaged,
- the device is no longer functional and
- the unit was stored under unfavourable conditions for a long period of time or
- if it has been subjected to considerable stress in transit.

7. Maintenance and cleaning

Before cleaning the housing of the surveillance camera, separate it from the mains
voltage and disconnect the mains adapter from the mains socket.
To clean the outside of the camera, a dry, soft and clean cloth is sufficient. For
stronger contamination of the camera, you can moisten the cloth slightly with luke-
warm water.
Clean the lens very carefully, you may otherwise scratch it.
16