Displaying The Whole Route - Becker Ready 50 Bedienungsanleitung

Displaying the whole route

(Only available when route guidance is
active.)
You can have the whole route to the
destination displayed on the map.
Additionally, you can have a complete
route description displayed. As a further
option, you can display and, if needed,
select the different routes that can be set
in the Route options.
> Call up the options menu for the map
display.
> Press the button.
Show route
The complete route is displayed.
You can set the route options using the
button.
Options
By pressing the Play
whole route can be simulated. The
control elements, that are displayed by
touching the screen shortly, allow you to
play the simulation in up to 16x speed, or
to step from route section to route
section. The simulation can be stopped by
pressing the back
Route description
> When the whole route is displayed,
press the
Sections
The first point of the route description is
displayed on the map.
You can scroll through the whole route
description with the
buttons.
You can also display a list version of the
route description. For this press the
button. The simulation is continued
view
by pressing the
button, the
button.
> Press the
button.
If you press an entry in the route
description, it is displayed on the map.
and
Next Back
List
button.
Resume
NAVIGATION MODE
arrow keys on
the right hand side of the screen to
scroll through the list.
>>>
> D
> GB
> F
> I
> PL
97