The Individual Menu Items; Battery; Automatic On/Off - Becker Ready 50 Bedienungsanleitung

>>> SETTINGS

The individual menu items

> D

Battery

Your Navigation device may be operated
> GB
using an external power supply unit or
> F
an integrated rechargeable battery.
> I
Note:
The current charging state is important
> PL
when operating with a battery. If the
battery is low on power, it may not be
possible to continue navigation right to
the destination.
The energy supply and status are shown
on a display.
Displaying the power supply
You can call up the status display using
the following button:
> Press the
Battery
The status display appears and shows
the power supply.
128
The power level is shown in the charge
display. In the example, the battery still
has around two-thirds charge.
The charging operation is indicated by
the mains socket symbol in the status
display.
Closing the status display
button.
Pressing the
display and shows the settings menu.
button closes the status
OK

Automatic on/off

The Navigation device can switch
automatically to sleep mode when the
vehicle ignition is switched off.
Prerequisite for this:
• The Navigation device must be
connected to the vehicle cigarette
lighter (see also page 19).
• The cigarette lighter is de-energized
after the ignition is switched off.
• The relevant function can be switched
on at the Navigation device.
Switching the function on/off
> Press the
Automatic on/off
Depending on the previous setting, you
can switch the function on or off. The
current setting is shown by the icon.
• Top icon: The function is switched on,
the Navigation device switches off
automatically.
button.