Content Manager; Installing The Content Manager - Becker Ready 50 Bedienungsanleitung

Content Manager

The Content Manager is a PC-based
application containing a number of
important functions to help you manage
the content on your Navigation device.
With the Content Manager you can:
• back up the content saved on the
Navigation device to your PC and
restore it later to your Navigation
device,
• download current content from the
Internet and install it on the Navigation
device.
To use the Content Manager, you will
need the USB cable provided as well as a
computer that meets the following
minimum requirements:
Minimum
Operating system Windows XP
Processor 300 MHz clock
frequency
Main memory 256 MB
Free storage space 2 GB

Installing the Content Manager

You can install the Content Manager on
your computer with the following steps:
> Connect the USB interface of the de-
vice directly to a USB port of the com-
puter using the USB cable supplied.
> If the application does not start auto-
matically, please start the file "CON-
TENTMANAGER" manually in the folder
"Becker_Content_Manager_Setup".
> Select a language from the list and
then click on .
OK
> Read the welcome page and click on
to continue.
Next
> Select the installation folder. A default
installation folder is already specified.
To select another folder, either type in
the path name or click on
define another folder.
> Click on
Install
procedure. Click on
details during copying.
The Content Manager is automatically
started immediately after installation.
Remove the check mark from the box if
you do not want this.
This completes the installation proce-
dure.
> Click on
Finish
program.
and
Browse
GENERAL OPERATION
to start the copying
to see the
Details
to exit the installation
35
>>>
> D
> GB
> F
> I
> PL