Setting Day/Night Display; Displaying Current Position; Where Am I?) - Becker Ready 50 Bedienungsanleitung

>>> NAVIGATION MODE
a road length between 200m and 50km.
As soon as you selected the stretch, a
> D
new route
> GB
Furthermore, the distance and time
difference are also displayed in the lower
> F
part of the display.
> I
Notes:
• If route guidance is not active, you can
> PL
only select between 200 and 500 m
(250 and 500 yards). You can then
define directly the days and times
when the route should be blocked.
• After the temporary blocking of a
section, the Clear blockings option
appears in the option menu of the
map view. Press this button to delete
all temporary blockings. If a route
guidance is active, the former route is
restored.
100

Setting day/night display

You can switch the Navigation device
will be calculated.
display from day to night and vice versa.
> Call up the options menu for the map
> Press the
The display changes from day to night
and vice versa.
display.
button.
Day/Night

Displaying current position

(Where am I?)

You can display your current position,
make an emergency call (depending on
model), select a hospital or filling station
and save this position. Furthermore, you
can display information regarding the
current GPS reception and the current
country.
> Call up the options menu for the map
display.
> Press the
button.
Where Am
The current position is displayed. If
possible, an address is displayed. If no
address is available for the current
position, the geographic coordinates are
displayed.
With the button you can
Emergency call
make an emergency call under the Eu-
rope-wide standard emergency call