Memory Card - Becker Ready 50 Bedienungsanleitung

Cable for vehicle integration
(depending on model, optional)
With a 4-pin 2.5mm jack cable you can
integrate your Navigation
seamlessly into your vehicle.
• connect your Navigation device to the
phone mute function of your audio
system. If the cable is connected
correctly, your audio system will mute
the car radio during navigation
announcements.
• connect your Navigation device to your
audio system for output of the audio
signal.
GND
Telephone Mute:
Audio-R
Audio-L
device
> Insert the cable into the 2.5mm socket
provided on the underside of the
carrier plate.
Note:
Once the cable is connected, the
loudspeaker of the basic device is
switched off. The Tel-Mute function
cannot be used with the cable supplied.
A cable must
manufactured for this.

Memory card

Your Navigation device has a slot for a
micro SD memory card.
As the map data is stored in an internal
memory on the Navigation device, the
slot for a micro SD memory card is used
for updates and for viewing images.
The memory card can also be used for
supplementing the map data.
be individually
The card slot is located on the left on the
underside of the unit. The card slot is
equipped with a spring-actuated locking
and ejector mechanism.
GENERAL OPERATION
21
>>>
> D
> GB
> F
> I
> PL