Radio Remote Control - Becker Ready 50 Bedienungsanleitung

The back button
The is integrated in the bottom left
hand corner of the casing.
It has various functions:
• Depending on the menu context, if
pressed briefly, you will be returned to
the previous entry level.
• The main menu is displayed by
pressing and holding the button.

Radio remote control

Note:
It is not absolutely essential for the
function of the Navigation device to
install the remote control.
You can control most functions and the
main functions of the Navigation device
using the remote control. The remote
control operates using radio frequency
(maximum range 5 metres) and
therefore does not need to be installed in
sight of the Navigation device.
Attaching the remote control
Note:
Attach the remote control so that it does
not impair your ability to operate your
vehicle. The remote control must not be
attached within the deployment area of
the airbag or on an airbag cover.
> Take a coin and insert it into the slot in
the base plate of the remote control.
> Turn the coin anti-clockwise.
GENERAL OPERATION
This unlocks the base plate, which can
now be removed.
> Insert the supplied battery (CR2032/
DL2032) into the battery compartment
with the positive side facing up.
> Press down the battery until it locks
into place.
Centre console
Armrest
> Select a suitable position to install the
remote control.
>>>
> D
> GB
> F
> I
> PL
31